CAPACITY
Workhead:
Swing over main slide, max dia: 12″ (304mm)
Collet work dia,:
–max: 1.25″ (31mm)
–min 0.12″ (3mm)
Lead generated by spiral lead mechanism min: 1.81″ (45mm)
Length between spindle nose and tail center max: 6″ (152mm)
Wheelhead:
Grinding wheel dia, max: 4″ (101mm)
RANGE
Workhead:
Main slide travel: 5.75″ (146mm)
Offset slide travel, total: 5.25″ (133mm)
–Front of center: 3″ (76mm)
–Rear of center: 2.25″ (57mm)
Workhead angular adjustment:
Horizontal plane (turntable base): 235 degrees
Vertical plane:
–Above center: 40 degrees
–Below center: 40 degrees
Wheelhead:
Longitudinal slide travel: 6″ (152mm)
Vertical slide travel, total: 9.50″ (241mm)
–Above center: 4.50″ (114mm)
–Below center: 5″ (127mm)
Cross slide travel, total: 7.50″ (190mm)
–Front of center: 3″ (76mm)
–Rear of center: 4.50″ (114mm)
SPINDLE SPEEDS
(±0%,-8% variation allowable)
Workhead, one speed: 436 rpm
Wheelhead, three speeds: 4000, 5729 and 8000 rpm
(motor speed @ 3600 rpm)
Internal grinding attachment (extra cost), three speeds,
approx: 16410, 23510, and 32820 rpm
MOTORS, ELECTRIC
Workhead drive, AC: includes reverse 1/4 hp (0.186 kW)
Wheelhead drive, AC: 1/2 hp (.373 kW)
FLOOR SPACE & WEIGHT
Area of base only: 25″x26″ (635mmx660mm)
Area required for machine (including swivel and overtravel movements): 60″x67″ (1524mmx1701mm)
Height from floor to center of workhead spindle: 47.72″ (1212mm)
Height, overall with wheelhead raised: 62.12″ (1577mm)
Net weight (including motors and controls): 1525 lbs (691 kilograms)
*All prices & specifications subject to change without notice.
